Because the system displays a printed graphic on both sides, your branding remains visible when visitors approach from either direction. Therefore, it works particularly well beside entrances, event routes, promotional areas and open spaces.

The system includes two custom printed graphics, one on each side, each providing an 850 × 2025mm visible display area. Both sides can feature matching artwork or different promotional messages.

The unit features large twin stabilising feet and includes ground pegs for securing the display on suitable ground. The supplier specifies a maximum wind speed of 24mph (38kph) when correctly secured with ground pegs, or 7mph (11kph) without them.

Each complete kit includes the roller banner unit, two custom printed Standard PVC graphics, a three-part heavy-duty bungee support pole, multi-screw-secured snap top rails, ground pegs and a carry case.

This product forms part of our wider Roller Banners UK collection, with nationwide UK delivery available.

Outdoor Roller Banner Specifications

The Outdoor Roller Banner is supplied in one 850mm-wide format, with two printed graphics for displaying artwork on both sides.

The following specifications describe the Outdoor Roller Banner supplied by Jenwill Printers.

Before ordering, check that your event location has sufficient space for the complete 895mm-wide, 2090mm-high and 810mm-deep system, including its stabilising feet.

Request the current artwork template before preparing print files.

Key Product Features

• Weather-resilient outdoor retractable roller banner system
• Double-sided display with two custom printed graphics
• 850 × 2025mm visible graphic area on each side
• 850 × 2175mm full graphic size listed by the supplier
• Matching or different artwork available for each side
• Custom printed Standard PVC graphics
• Robust base with large twin stabilising feet
• Ground pegs included for securing the display on suitable ground
• Three-part heavy-duty bungee support pole
• Multi-screw-secured snap top rails
• Carry case included
• Suitable for temporary outdoor advertising and events
• Wind resistance up to 24mph (38kph) when correctly secured with ground pegs
• Maximum wind speed of 7mph (11kph) without ground pegs

Double-Sided Outdoor Advertising

The system contains one retractable printed graphic on each side. As a result, your advertising can be viewed from two different directions without requiring two separate banner bases.

You can repeat the same design on both sides for consistent branding. Alternatively, each graphic can display a different message.

For example, one side could show your company branding while the opposite side promotes a particular product, event or offer.

Different artwork can also be used for:

• Separate products or services
• Directional information
• Event entrance and exit messages
• Two promotional campaigns
• Company information and contact details
• Different messages for approaching visitors

Therefore, the banner can communicate with visitors travelling in either direction through an outdoor event space.

Printed Outdoor Roller Banner Graphics

Both graphics are custom printed on Standard PVC banner material, as specified for this outdoor roller banner system.

The display includes a separate printed graphic on each side, allowing your branding or promotional messages to be viewed from two directions.

Each graphic is held in place using a multi-screw-secured snap top rail.

For effective outdoor advertising, use bold lettering, high-contrast colours and clear images. Keep the layout straightforward so visitors can understand your main message while walking past.

For example, use:

• One clear headline
• A prominent company logo
• One main photograph or illustration
• A concise promotional message
• A visible website or call to action

Consequently, visitors can understand the main message without needing to stand directly beside the display.

Large Twin Feet and Ground Pegs

The Outdoor Roller Banner features large twin stabilising feet and includes ground pegs for securing the display on suitable ground surfaces.

When correctly secured with the supplied ground pegs, the supplier states a maximum wind speed of 24mph (38kph).

Without ground pegs, the maximum stated wind speed is 7mph (11kph).

Ground pegs must be securely anchored in suitable ground. On concrete, paving or other surfaces where pegs cannot be used, the higher wind rating does not apply.

Always assess the ground conditions, forecast wind speeds and potential gusts before setting up the display.

If wind conditions exceed the stated limits or the unit cannot be safely secured, do not use the banner outdoors.

For current wind and weather information, check the official Met Office UK forecast before travelling to an outdoor event.

How to Assemble the Outdoor Roller Banner

First, remove the roller banner unit, three-part support pole and ground pegs from the supplied carry case.

Next, position the base on stable, level ground and check that the large twin feet are correctly positioned.

Where suitable ground allows, secure the stabilising feet using the supplied ground pegs. This is essential when relying on the supplier’s higher wind-speed rating.

Connect the three sections of the heavy-duty bungee support pole and position the assembled pole according to the supplied instructions.

Carefully raise the first printed graphic vertically from the cassette and attach its top rail to the support system.

Then, raise the second graphic from the opposite side and secure its top rail.

Check that both graphics are correctly supported, the base is stable and the ground pegs are firmly anchored.

After the event, release each graphic and guide it slowly and straight back into the cassette. Avoid pulling or retracting the graphics at an angle.

Finally, remove the ground pegs, separate the support pole sections and pack the complete system into the carry case.

Where to Use an Outdoor Roller Banner

An outdoor roller banner is suitable for temporary promotions where a portable, freestanding display is required.

Common uses include:

• Outdoor exhibitions and trade events
• Festivals and community events
• School and university events
• Sports events
• Charity fundraising activities
• Outdoor product launches
• Retail forecourts
• Visitor entrances and information points
• Hospitality and promotional areas

For example, position the display beside an event entrance so visitors can see the branding while approaching and leaving.

Alternatively, use different artwork on each side to direct visitors towards separate areas or activities.

However, keep the base and feet away from narrow walkways, emergency routes and locations where they could obstruct visitors.

Outdoor or Indoor Roller Banner?

Choose this Outdoor Roller Banner when the display needs stabilising feet, ground pegs and graphics facing two directions.

By contrast, an indoor roller banner is usually lighter and does not require an outdoor stabilisation system.

For indoor use where both sides will remain visible, compare our Double-Sided Roller Banner.

For a standard front-facing indoor display, consider:

• Economy Roller Banner – suitable for occasional indoor promotions
• Mid Range Roller Banner – suitable for regular business events
• Premium Roller Banner – intended for more frequent indoor exhibition use

Therefore, choose according to the event environment rather than using a standard indoor system outside.

Artwork Requirements

Two artwork files are required when each side will display a different design.

Alternatively, supply one artwork file and confirm that the same design should be printed on both graphics.

Before preparing the files, request the correct 850mm artwork template. This is important because the full document includes an additional section that remains inside the roller cassette.

Supply print-ready PDF files in CMYK colour whenever possible. In addition, keep important text, logos and contact details within the recommended safe area.

Your artwork should include:

• The correct template dimensions
• The required bleed
• The additional cassette allowance
• High-quality embedded images
• Outlined or embedded fonts
• Clear identification of side one and side two

Once we receive your enquiry, Jenwill Printers can confirm the correct template and artwork requirements.

Complete Your Outdoor Event Display

Combine your Outdoor Roller Banner with other suitable promotional products, such as:

• Printed Tablecloths – add branding to an event table
• Exhibition Counters – create a welcome or information point
• Roller Banners UK – compare the complete indoor and outdoor range

Always check that each selected display product is suitable for the intended environment before using it outdoors.

Request an Outdoor Roller Banner Quote

First, confirm that the 850mm-wide format suits your event space.

Next, decide whether both sides will use matching or different artwork.

Then provide your quantity, event date, delivery postcode and artwork requirements through the product enquiry form.

Finally, submit your enquiry and Jenwill Printers will review your requirements and contact you with a quotation.

Request a Quote →

The post Tempest Outdoor Roller Banner appeared first on Jenwill Printers.