4×3 Magnetic Pop Up Exhibition Stand
Description
A 4×3 magnetic pop up exhibition stand provides a wide, portable branded backdrop for exhibitions, trade shows, conferences and promotional events.
The reusable collapsible frame uses magnetic support bars to hold separate custom printed graphic panels in position. Choose a straight frame for a wide, flat display wall or a curved frame for a shaped exhibition backdrop.
The 4×3 format provides four main front graphic panels plus two printed end panels, giving your business substantial space for branding, product photography and promotional messages.
Part of our Magnetic Pop Up Displays range.
Why Choose a 4×3 Magnetic Pop Up Exhibition Stand?
The 4×3 system is suitable for exhibitors who require a large branded backdrop while retaining a collapsible frame that can be transported, stored and reused.
- Wide exhibition and trade show backdrop
- Choice of straight or curved frame
- Four main front graphic panels
- Two printed end panels
- Reusable collapsible frame
- Magnetic bars for positioning the graphic panels
- Starter and complete kit options
- Replacement graphic panels available
- Wheeled transport case with the complete kit
- Two LED display lights with the complete kit
- Nationwide UK delivery available
This display may also be described as a 3×4 magnetic pop up stand. Always use the confirmed dimensions and correct artwork template rather than relying only on the advertised size name.
Choose Your 4×3 Magnetic Pop Up Stand Configuration
Straight 4×3 Magnetic Pop Up Panel Stand
The straight configuration creates a wide, flat branded exhibition wall.
Its assembled hardware dimensions are approximately:
- Height: 2240mm
- Width: 3435mm
- Depth: 325mm
The straight display uses:
- Four front straight graphic panels
- Two printed D-end panels
The shallow floor depth makes the straight frame suitable for positioning against a shell scheme wall, stand boundary or within an exhibition space where a flat backdrop is preferred.
Curved 4×3 Magnetic Pop Up Stand
The curved configuration creates a gently shaped branded backdrop that projects further into the exhibition area.
Its assembled hardware dimensions are approximately:
- Height: 2240mm
- Width: 3070mm
- Depth: 980mm
The curved display uses:
- Four front curved graphic panels
- Two printed D-end panels
The curved frame is narrower than the straight system but requires considerably more floor depth.
Measure the usable width, height and depth of your exhibition space before selecting the frame shape.
4×3 Magnetic Pop Up Exhibition Stand Specifications
| Specification | Straight display | Curved display |
|---|---|---|
| Assembled height | 2240mm | 2240mm |
| Assembled width | 3435mm | 3070mm |
| Assembled depth | 325mm | 980mm |
| Main front panels | Four straight panels | Four curved panels |
| End panels | Two D-end panels | Two D-end panels |
| Starter-kit packed size | 900 × 220 × 280mm | 900 × 220 × 280mm |
| Starter-kit weight | Approximately 14.5kg | Approximately 14.5kg |
| Complete-kit packed size | 980 × 600 × 400mm | 980 × 600 × 400mm |
| Complete-kit weight | Approximately 29kg | Approximately 29kg |
Custom Printed Magnetic Graphic Panels
The artwork is printed across separate semi-rigid PVC panels that attach to the magnetic frame and align to create the complete exhibition backdrop.
The graphic specification is:
- Material: 400-micron pop up PVC
- Front straight panel: 2225 × 733mm
- Front curved panel: 2225 × 673mm
- D-end panel: 2225 × 673mm
Your printed design can include:
- Company logos and brand colours
- Product and service information
- Promotional messages
- Product photography
- Website and contact details
- QR codes and calls to action
Avoid positioning small text, faces, logos or other important design elements directly across the panel joins.
Request the correct straight or curved artwork template before preparing the final print file.
How the 4×3 Magnetic Pop Up Stand Works
The collapsible frame expands to create the main exhibition display structure.
Magnetic support bars attach to the frame. Graphic hangers and kickers then position the printed panels across the front and ends of the display.
The basic setup process is:
- Expand and secure the collapsible frame.
- Attach the magnetic support bars.
- Fit the graphic hangers and kickers.
- Position the four front graphic panels.
- Fit the two printed end panels.
- Align the panel edges across the display.
- Attach the display lights where included.
After the event, remove and roll the printed panels before collapsing the frame for transport and storage.
4×3 Starter Kit or Complete Kit
4×3 Starter Kit
The starter kit includes the main display hardware:
- Collapsible 4×3 pop up frame
- Magnetic support bars
- Graphic hangers and kickers
- Roll of magnetic fixing tape
The starter kit does not include printed graphics, a transport case, tabletop or display lights unless they are selected separately.
4×3 Complete Kit
The complete hardware kit includes:
- Collapsible 4×3 pop up frame
- Magnetic support bars
- Graphic hangers and kickers
- Roll of magnetic fixing tape
- Wheeled transport case
- Case tabletop
- Two 10W LED display lights
Printed graphic panels should be selected separately unless your chosen product option clearly states that they are included.
Check the selected option carefully before ordering.
Wheeled Transport Case and Display Lights
The complete kit includes a wheeled transport case for storing and moving the collapsed frame, magnetic components and rolled graphic panels.
The supplied tabletop allows the transport case to be converted into a temporary exhibition counter after the display has been unpacked.
Two 10W LED display lights are also included with the complete kit to illuminate the printed backdrop from above.
Check the selected product option to confirm whether the following are included:
- Wheeled transport case
- Case tabletop
- Printed case graphic
- Two LED display lights
A printed graphic for the transport case is not included unless it is specifically selected.
Replacement Graphics for a 4×3 Magnetic Pop Up Stand
Replacement printed panels can be supplied for compatible 4×3 magnetic pop up frames.
Replacement graphics allow you to continue using the existing display hardware when:
- Your branding changes
- You launch a new product or service
- You require different artwork for another event
- Your existing panels become damaged or worn
- You need campaign-specific graphics
Before ordering replacement graphics, confirm:
- The exact frame model
- Whether the frame is straight or curved
- The assembled dimensions
- The number of front and end panels
- The width and height of each panel
- The graphic hanger and kicker arrangement
A straight front panel will not fit the curved system because the front-panel widths are different.
Please provide clear photographs, measurements or an existing artwork template before replacement graphics enter production.
Artwork Requirements
Request the correct artwork template for your chosen straight or curved frame before preparing the final design.
Keep important content within the recommended safe areas and away from:
- Panel joins
- Trimmed panel edges
- Graphic hangers and kickers
- Areas wrapping around the ends of the frame
The design should be prepared as one coordinated exhibition backdrop while allowing for the four individual front panels and two end sections.
Supply print-ready artwork according to the template provided with your order.
Is the 4×3 Magnetic Pop Up Stand the Right Size?
Choose the 4×3 system when you need a large branded exhibition backdrop with space for prominent logos, product imagery, promotional information and calls to action.
The straight option provides the widest front-facing display and requires less floor depth.
The curved option creates a shaped backdrop but projects further into the exhibition area.
Before ordering, measure:
- The usable stand width
- The permitted display height
- The available floor depth
- The space required for counters and tables
- The space needed for visitor access
For smaller or larger configurations, browse the complete Magnetic Pop Up Display range.
Planning Your Exhibition
Before ordering, check the organiser’s requirements covering stand dimensions, shell scheme boundaries, electrical access, setup times and venue deliveries.
Businesses exhibiting at NEC Birmingham can also review the official NEC exhibitor information before attending an event.
Frequently Asked Questions
What are the assembled dimensions?
The straight frame measures approximately 3435mm wide, 2240mm high and 325mm deep.
The curved frame measures approximately 3070mm wide, 2240mm high and 980mm deep.
How many graphic panels does the display use?
The standard graphic layout uses four main front panels and two printed D-end panels.
Are the straight and curved graphic panels the same size?
No. Straight front panels measure approximately 2225 × 733mm, while curved front panels measure approximately 2225 × 673mm.
What does the complete kit include?
The complete hardware kit includes the frame, magnetic bars, hangers, kickers, magnetic tape, wheeled transport case, tabletop and two 10W LED display lights.
Printed graphics must be selected separately unless the product option states otherwise.
Can I order replacement graphic panels?
Yes. Replacement panels can be supplied after the exact frame shape, dimensions and panel arrangement have been confirmed.
Do you deliver throughout the UK?
Yes. Jenwill Printers supplies 4×3 magnetic pop up exhibition stands with nationwide UK delivery.
Order Your 4×3 Magnetic Pop Up Exhibition Stand
Select your preferred straight or curved frame, starter or complete kit and required printed graphics before placing your order.
For help confirming the correct configuration, provide your available stand dimensions, event date and delivery postcode.
