Double-Sided Roller Banner
Description
The Double-Sided Roller Banner displays custom printed artwork on both sides of one portable pull-up system.
Because visitors can view the display from two directions, it works well in exhibition aisles, open event spaces, retail areas, reception areas and conference venues.
Choose either an 850mm or 1000mm width. Both sides have a 2000mm visible graphic height. Each full printed graphic measures 2150mm high, including the additional section held inside the roller banner base.
Each complete system includes a double-sided roller banner unit, two custom printed graphics, a single support pole for both graphics, snap-clip top rails and a premium carry bag.
The updated base features adjustable screw feet for levelling and black powder-coated end caps, without a twist-out stabilising foot. Both sides can display matching artwork or two different designs.
This product forms part of our wider Roller Banners UK collection, with nationwide UK delivery available.
Double-Sided Roller Banner Sizes
Choose between 850mm and 1000mm widths to suit your exhibition space and artwork requirements.
Both models display two printed graphics, one on each side. Each graphic has a visible height of 2000mm and a full printed height of 2150mm, including the section held inside the banner unit.
| Specification | 850mm model | 1000mm model |
|---|---|---|
| Visible graphic size (each side) | 850 × 2000mm | 1000 × 2000mm |
| Full printed graphic size (each side) | 850 × 2150mm | 1000 × 2150mm |
| Overall assembled size (W × H) | 870 × 2200mm | 1020 × 2200mm |
| Product weight | 5kg | 6kg |
| Number of printed graphics | Two | Two |
Before ordering, measure the planned position carefully. In particular, allow enough space around the base so visitors can move safely past both sides of the display.
Key Product Features
- Double-sided retractable roller banner system
- 850mm and 1000mm width options
- 2000mm visible graphic height on each side
- 2150mm full printed graphic height on each side
- Two custom full-colour printed graphics included
- Matching or different artwork available for each side
- Grey-backed light-stop display material
- Anti-curl, anti-scuff and anti-glare graphic finish
- Single support pole for both graphics
- Adjustable screw feet for levelling
- No twist-out stabilising foot on the updated model
- Black powder-coated end caps
- Snap-clip top rails
- Premium carry bag included
- Suitable for indoor exhibitions and events
Two Printed Graphics in One Display
The system uses one printed graphic on each side. Therefore, your message remains visible when visitors approach from either direction.
You can repeat the same artwork on both sides for consistent branding. Alternatively, each graphic can carry a different design.
For example, one side could introduce your company while the other promotes a particular product, service or offer.
Different artwork can also support:
- Two separate products or services
- Branding on one side and contact information on the other
- Different messages for each direction of visitor traffic
- Event information and directional signage
- Separate promotional campaigns
- English and translated versions of the same message
As a result, one display can serve more than one communication purpose without requiring two separate roller banner units.
Grey-Backed Block-Out Graphics
Both graphics use grey-backed block-out display media.
Because the material includes an opaque backing, artwork from one side is less likely to show through to the other side. Consequently, each design can remain clear and separate.
The graphic surface also provides anti-curl and low-reflection properties. Therefore, logos, text and product photographs remain easier to view under typical indoor exhibition lighting.
However, your layout should still remain simple and readable. For example, use a clear headline, one main image and a direct call to action rather than filling every part of the banner.
Double-Sided Roller Banner Base with Adjustable Feet
The Double-Sided Roller Banner features a robust aluminium base with black powder-coated end caps, providing a professional finish for indoor exhibitions, conferences and retail displays.
The updated design uses adjustable screw feet underneath the base for levelling on suitable indoor floors. Unlike the previous model, it does not require a twist-out stabilising foot.
Two printed graphics extend from opposite sides of the banner unit, allowing branding and promotional messages to be viewed from both directions.
A single support pole supports both graphics, creating a convenient double-sided display without requiring two separate roller banner systems.
Position the display on a stable indoor surface and keep surrounding walkways clear.
How to Assemble the Double-Sided Roller Banner
First, remove the roller banner unit and support pole from the supplied carry bag.
Next, place the aluminium base on a stable indoor floor. Adjust the screw feet underneath the base as required to level the display.
Position the single support pole according to the supplied assembly instructions. This pole supports both printed graphics.
Carefully raise the first printed graphic and secure its snap-clip top rail to the support system.
Then, raise the second graphic from the opposite side and secure its top rail as instructed.
Check that both graphics are correctly supported, the base is stable and the surrounding walkway remains clear.
After the event, carefully release the top rails and guide both graphics back into the banner unit. Pack the hardware into the supplied carry bag.
Where to Use a Double-Sided Roller Banner
A double-sided display is particularly useful when it will stand away from a wall.
Common locations include:
- Exhibition stand entrances
- Trade-show aisles
- Open-plan exhibition spaces
- Conference reception areas
- Retail floors and shopping centres
- Hotel event spaces
- University and recruitment events
- Visitor information points
- Product launches and demonstrations
For example, position the banner at the end of an exhibition stand so visitors can see a message from either aisle.
Alternatively, place it between two display areas and use different artwork to direct each audience.
Businesses planning upcoming events can also view exhibition dates and venue information on the official NEC Birmingham events calendar.
Double-Sided or Single-Sided Roller Banner?
Choose this Double-Sided Roller Banner when visitors can approach from both directions.
By contrast, a single-sided model may be sufficient when the back of the display will face a wall, shell-scheme panel or another exhibition backdrop.
- Double-sided: suitable for aisles, entrances and open spaces
- Single-sided: suitable for walls, stand edges and front-facing displays
For an entry-level single-sided option, compare our Economy Roller Banner.
Meanwhile, our Mid Range Roller Banner provides a single-sided option for more regular business use.
For demanding event schedules, also compare the Premium Roller Banner.
Artwork Requirements
Two graphic files are required when each side will display different artwork.
Alternatively, supply one design and confirm that it should appear on both sides.
Before preparing the files, request the correct template for the selected 850mm or 1000mm model. This is important because the full artwork includes an additional section that remains inside the cassette.
Supply print-ready PDFs in CMYK colour whenever possible. In addition, keep important text, logos and contact details within the recommended safe area.
Your files should include:
- The correct template dimensions
- The required bleed
- The additional cassette allowance
- High-quality embedded images
- Outlined or embedded fonts
- Clear identification of side one and side two
Once we receive your enquiry, Jenwill Printers can confirm the correct artwork template and file requirements for your selected size.
Complete Your Exhibition Display
Combine your Double-Sided Roller Banner with:
- Exhibition Backdrop Walls – create a larger branded background
- Exhibition Counters – add a reception or demonstration point
- Printed Tablecloths – add branding to an exhibition table
- Fabric Display Stands – compare larger tension-fabric systems
Alternatively, browse our complete Roller Banners UK collection.
Request a Double-Sided Roller Banner Quote
First, choose the required 850mm or 1000mm width.
Next, confirm whether both sides will use matching or different artwork.
Then provide your quantity, event date, delivery postcode and artwork requirements through the product enquiry form.
Finally, submit your enquiry and Jenwill Printers will review your requirements and contact you with a quotation.
