The Waterfall XL Canopy is an add-on shelving solution for 89″h Media® event and trade show displays. Optional shelves can be placed at different heights and clamp-on the inside or outside of the frame. Each optional shelf can support up to 9lbs each. Use the Waterfall XL Canopy stand alone frame without graphics or with zip-on fabric graphics to create a branded look.

Kit Includes

(Back display wall not included)

• (1) Aluminum Frame with set of Attachment Clips
• (2) Circular Feet
• Nylon Bag
• Half or Full Graphic Print, Single or double-sided

Add-on Accessories

• WLM-P-139 Clear Shelf
• CA700 Hard Case

Specifications

• Frame Size: 36″Wx89″HX97″D (913Wx2260Hx2447D mm)
• Packaged Size: 12.3″x7.1″X32″ (310×180×810mm)
• Approx. Weight: 15.5 lbs (frame & graphics only)
• Shelf Size: 36”w x 12”d
• Weight: 15 lbs (3 shelves)
• Shelf Weight Capacity: 9 lbs per shelf
• Waterfall Weight Capacity: 27 lbs per display
• Warranty: One (1) year on hardware and graphics.

Artwork Templates

• WFAXL-G-368997 Large – 97″D Half
• WFAXL-G-368997 Large – 97″D Full
• Artwork Guidelines: View

The post Waterfall XL Canopy for Media – Large Exhibition Display Stand appeared first on Jenwill Printers.

The Waterfall XL Canopy is an add-on shelving solution for 89″h Media® event and trade show displays. Optional shelves can be placed at different heights and clamp-on the inside or outside of the frame. Each optional shelf can support up to 9lbs each.Use the Waterfall XL Canopy stand alone frame without graphics or with zip-on fabric graphics to create a branded look.

Kit Includes

(Back display wall not included)

• (1) Aluminum Frame with set of Attachment Clips
• (2) Circular Feet
• Nylon Bag
• Half or Full Graphic Print, Single or double-sided

Add-on Accessories

• WLM-P-139 Clear Shelf
• CA700 Hard Case

Specifications

• Frame Size: 36″Wx89″HX79″D (913Wx2260Hx2006D mm)
• Packaged Size: 12.3″x7.1″X32″ (310×180×810mm)
• Approx. Weight: 15.5 lbs (frame & graphics only)
• Shelf Size: 36”w x 12”d
• Weight: 15 lbs (3 shelves)
• Shelf Weight Capacity: 9 lbs per shelf
• Waterfall Weight Capacity: 27 lbs per display
• Warranty: One (1) year on hardware and graphics.

Artwork Templates

• WFAXL-G-368979 Medium – 79″D Half
• WFAXL-G-368979 Medium – 79″D Full
• Artwork Guidelines: View

The post Waterfall XL Canopy for Media – Medium Exhibition Display Stand appeared first on Jenwill Printers.

The Waterfall XL Canopy is an add-on shelving solution for 89″h Media® event and trade show displays. Optional shelves can be placed at different heights and clamp-on the inside or outside of the frame. Each optional shelf can support up to 9lbs each. Use the Waterfall XL Canopy stand alone frame without graphics or with zip-on fabric graphics to create a branded look.

Kit Includes

(Back display wall not included)

• (1) Aluminum Frame with set of Attachment Clips
• (2) Circular Feet
• Nylon Bag
• Half or Full Graphic Print, Single or double-sided

Add-on Accessories

• WLM-P-139 Clear Shelf
• CA700 Hard Case

Specifications

• Frame Size: 36″Wx89″HX114″D (913Wx2260Hx2876D mm)
• Packaged Size: 12.3″x7.1″X32″ (310×180×810mm)
• Approx. Weight: 17.6 lbs (frame & graphics only)
• Shelf Size: 36”w x 12”d
• Weight: 15 lbs (3 shelves)
• Shelf Weight Capacity: 9 lbs per shelf
• Waterfall Weight Capacity: 27 lbs per display
• Warranty: One (1) year on hardware and graphics.

Artwork Templates

• WFAXL-G-3689114 X-Large – 114″D Half
• WFAXL-G-3689114 X-Large – 114″D Full
• Artwork Guidelines: View

The post Waterfall XL Canopy for Media – X-Large Exhibition Display Stand appeared first on Jenwill Printers.

The Waterfall XL Canopy is an add-on shelving solution for 89″h Media® event and trade show displays. Optional shelves can be placed at different heights and clamp-on the inside or outside of the frame. Each optional shelf can support up to 9lbs each. Use the Waterfall XL Canopy stand alone frame without graphics or with zip-on fabric graphics to create a branded look.

Kit Includes

(Back display wall not included)

• (1) Aluminum Frame with set of Attachment Clips
• (2) Circular Feet
• Nylon Bag
• Half or Full Graphic Print, Single or double-sided

Add-on Accessories

• WLM-P-139 Clear Shelf
• CA700 Hard Case

Specifications

• Frame Size: 36″Wx89″HX20″D (913Wx2260Hx500D mm)
• Packaged Size: 12.3″x7.1″X32″ (310×180×810mm)
• Approx. Weight: 10 lbs (frame & graphics only)
• Shelf Size: 36”w x 12”d
• Weight: 15 lbs (3 shelves)
• Shelf Weight Capacity: 9 lbs per shelf
• Waterfall Weight Capacity: 27 lbs per display
• Warranty: One (1) year on hardware and graphics.

Artwork Templates

• WFAXL-G-368920 Small – 20″D Half
• WFAXL-G-368920 Small – 20″D Full
• Artwork Guidelines: View

The post Waterfall XL Canopy for Media – Small Exhibition Display Stand appeared first on Jenwill Printers.

Product discontinued: The Monolith 20ft x 10ft Display Wall is no longer available. For a lower-height 20ft-wide alternative, see our 20ft Straight Fabric Display Wall, or browse our full range of Exhibition Backdrop Walls.

The Monolith 20ft wide x 10ft high exhibition backdrop was a large-format tension fabric display wall designed for trade shows, exhibitions, events and branded presentation spaces. At approximately 6m wide, it provided an expansive printed graphic area for high-impact branding.

The freestanding system used lightweight 32mm anodised aluminium poles with internal bungee cords that connected to form the supporting frame. A custom printed stretch-fabric graphic slid over the structure like a pillowcase and zipped closed at the bottom, creating a smooth, tensioned finish with the fastening concealed from view.

Single-sided and double-sided graphic configurations were available, allowing the display to be positioned against a wall or used within an open exhibition space where branding could be viewed from both directions.

The following details are retained for reference to the discontinued Monolith display and do not indicate current product availability.

Original Kit Included

• 1 x 20ft wide x 10ft high straight frame, approximately 18″ / 457mm deep, using 32mm anodised aluminium tubing
• 1 x travel bag made from 100% recycled materials
• 1 x recyclable polyester stretch-fabric graphic
  • Single-sided or double-sided print options

Original Specifications

• Nominal size: 20ft wide x 10ft high
• Assembled size: approximately 6002mm W x 2951mm H x 457mm D
• Approximate imperial assembled size: 236″ W x 116″ H x 18″ D
• Physical weight with all components: approximately 71 lbs
• Dimensional shipping weight: approximately 100 lbs
• Material: dye-sublimation stretch fabric
• Warranty: One (1) year on hardware and graphics.

The post Monolith 20ft Display Wall / 20’x10′ Exhibition Display Stand appeared first on Jenwill Printers.

Product discontinued: The Monolith 20ft x 8ft Display Wall is no longer available. For a current alternative, see our 20ft Straight Fabric Display Wall, or browse our full range of Exhibition Backdrop Walls.

The Monolith Tension Fabric Display Wall is a 20ft x 8ft backdrop display designed to add depth and height to your event or trade show space. Lightweight aluminum poles with bungee cord snap together to create the base framework, then slide on the pillowcase-like graphic over the frame and zip it closed at the bottom. The zipper is hidden from view and tightens up the stretched fabric graphic for a smooth image. Single or Double-sided.

The following details are retained for reference to the discontinued Monolith display and do not indicate current product availability.

Original Kit Included

• (1) 20’x8′ Frame Straight (18″ Depth) – 1-1/4″ (32mm) cold-drawn anodized aluminum
• (1) Travel bag – made from 100% recycled materials
• (1) Graphic Print – recyclable polyester stretch fabric, vibrant, wrinkle-resistant
  • Single or double-sided

Original Specifications

• Assembled Size: 236″ w x 89″ h x 18″ d
• Box dims. 1 box @ 12 x 12 x 42 30lbs. 1 box @ 14 x 17 x 33 – 41 lbs.
• Physical Weight with all components: Approx. 71 lbs
• Dimensional Shipping Weight approx. 100 lbs
• Material: Dye-sublimation Stretch Fabric
• Warranty: One (1) year on hardware and graphics.

The post Monolith 20ft Display Wall / 20’x8′ Exhibition Display Stand appeared first on Jenwill Printers.

Product discontinued: The Monolith 8ft x 8ft Display Wall is no longer available. For the closest current size alternative, see our 8ft Straight Fabric Pop Up Exhibition Display, or browse our full range of Exhibition Backdrop Walls.

The Monolith 8ft x 8ft backdrop display was a straight tension fabric exhibition wall designed for trade shows, exhibitions, events and branded presentation spaces. The assembled display measured approximately 89″ wide x 89″ high x 18″ deep, providing a compact freestanding backdrop with additional frame depth.

The system used lightweight 32mm anodised aluminium poles with internal bungee cords that connected to create the supporting frame. A custom printed stretch-fabric graphic slid over the structure like a pillowcase and zipped closed at the bottom, helping produce a smooth, tensioned graphic surface with the fastening concealed from view.

Single-sided and double-sided graphic configurations were available, allowing the display to be positioned against a wall or used in open exhibition spaces where branding could be viewed from both sides.

The following details are retained for reference to the discontinued Monolith display and do not indicate current product availability.

Original Kit Included

• 1 x 8ft x 8ft straight frame, approximately 18″ / 457mm deep, using 32mm anodised aluminium tubing
• 1 x travel bag made from 100% recycled materials
• 1 x recyclable polyester stretch-fabric graphic
  • Single-sided or double-sided print options

Original Specifications

• Nominal size: 8ft wide x 8ft high
• Approximate assembled size: 89″ W x 89″ H x 18″ D
• Approximate metric size: 2261mm W x 2261mm H x 457mm D
• Physical weight with all components: approximately 67 lbs
• Dimensional shipping weight: approximately 80 lbs
• Material: dye-sublimation stretch fabric
• Warranty: One (1) year on hardware and graphics.

The post Monolith 8ft Display Wall / 8’x8′ Exhibition Display Stand appeared first on Jenwill Printers.

Product discontinued: The Monolith 10ft x 8ft Display Wall is no longer available. For the closest current alternative, see our 10ft Straight Fabric Display Wall, or browse our full range of Exhibition Backdrop Walls.

The Monolith 10ft x 8ft backdrop display was a straight tension fabric exhibition wall designed for trade shows, events, branded displays and media backdrops. The assembled display measured approximately 116″ wide x 89″ high x 18″ deep, providing an approximately 3m-wide freestanding graphic display.

The system used lightweight 32mm anodised aluminium poles with internal bungee cords that connected to create the supporting frame. A custom printed stretch-fabric graphic slid over the structure like a pillowcase and zipped closed at the bottom, helping create a smooth, tensioned graphic surface with the fastening concealed from view.

Single-sided and double-sided graphic configurations were available, allowing the display to be positioned against a wall or used in open exhibition spaces where branding could be viewed from both sides.

The following details are retained for reference to the discontinued Monolith display and do not indicate current product availability.

Original Kit Included

• 1 x 10ft x 8ft straight frame, approximately 18″ / 457mm deep, using 32mm anodised aluminium tubing
• 1 x travel bag made from 100% recycled materials
• 1 x recyclable polyester stretch-fabric graphic
  • Single-sided or double-sided print options

Original Specifications

• Nominal size: 10ft wide x 8ft high
• Approximate assembled size: 116″ W x 89″ H x 18″ D
• Physical weight with all components: approximately 67 lbs
• Dimensional shipping weight: approximately 80 lbs
• Material: dye-sublimation stretch fabric
• Warranty: One (1) year on hardware and graphics.

The post Monolith 10ft Display Wall / 10’x8′ Exhibition Display Stand appeared first on Jenwill Printers.

Product discontinued: The Monolith 10ft x 10ft Display Wall is no longer available. For a current alternative, see our 10ft Straight Fabric Display Wall, or browse our full range of Exhibition Backdrop Walls.

The Monolith Tension Fabric Display Wall is a 10ft x 10ft backdrop display designed to add depth and height to your event or trade show space. Lightweight aluminum poles with bungee cord snap together to create the base framework, then slide on the pillowcase-like graphic over the frame and zip it closed at the bottom. The zipper is hidden from view and tightens up the stretched fabric graphic for a smooth image. Single or Double-sided.

The following details are retained for reference to the discontinued Monolith display and do not indicate current product availability.

Original Kit Included

• (1) 10’x10′ Frame Straight (18″ Depth) – 1-1/4″ (32mm) cold-drawn anodized aluminum
• (1) Travel bag – made from 100% recycled materials
• (1) Graphic Print – recyclable polyester stretch fabric, vibrant, wrinkle-resistant
  • Single or double-sided

Original Specifications

• Assembled Size: 116″ w x 116″ h x 18″ d
• Box dims. 1 box @ 15 x 18 x 34 36 lbs 1 box @ 12 x 12 x 24 20 lbs.
• Physical Weight with all components: Approx. 67 lbs
• Dimensional Shipping Weight approx. 80 lbs
• Material: Dye-sublimation Stretch Fabric
• Warranty: One (1) year on hardware and graphics.

The post Monolith 10ft Display Wall / 10’x10′ Exhibition Display Stand appeared first on Jenwill Printers.

Product discontinued: The Monolith 10ft x 15ft Display Wall is no longer available. For a lower-height 10ft-wide alternative, see our 10ft Straight Fabric Display Wall, or browse our full range of Exhibition Backdrop Walls.

The Monolith 10ft x 15ft backdrop display was a tall-format tension fabric display designed for exhibitions, trade shows and branded event spaces. The assembled display measured approximately 2951mm wide x 4500mm high x 457mm deep, creating a substantial freestanding backdrop with additional height for high-impact branding.

The system used lightweight 32mm anodised aluminium poles with internal bungee cords that connected to create the supporting frame. A custom printed stretch-fabric graphic slid over the structure like a pillowcase and zipped closed at the bottom, helping create a smooth, tensioned finish with the fastening concealed from view.

Single-sided and double-sided graphic configurations were available. At approximately 4.5m high, this was an unusually tall exhibition display, so venue and event-organiser maximum stand-height restrictions were an important consideration.

The following details are retained for reference to the discontinued Monolith display and do not indicate current product availability.

Original Kit Included

• 1 x 10ft x 15ft straight frame, approximately 18″ / 457mm deep, using 32mm anodised aluminium tubing
• 1 x travel bag made from 100% recycled materials
• 1 x recyclable polyester stretch-fabric graphic
  • Single-sided or double-sided print options

Original Specifications

• Nominal size: 10ft wide x 15ft high
• Assembled size: approximately 2951mm W x 4500mm H x 457mm D
• Approximate imperial assembled size: 116″ W x 177″ H x 18″ D
• Physical weight with all components: approximately 66 lbs
• Dimensional shipping weight: approximately 88 lbs
• Material: dye-sublimation stretch fabric
• Warranty: One (1) year on hardware and graphics.

The post Monolith 10ft Display Wall / 10’x15′ Exhibition Display Stand appeared first on Jenwill Printers.