Available in 3m x 3m, 3m x 4.5m and 3m x 6m sizes, we print every Heavy Duty Printed Gazebo in full colour using dye-sublimation printing onto durable 600D polyester. You can choose a printed canopy or add optional full-height printed walls with single or double-sided printing to create a professional branded display.

Compared with our standard printed gazebo range, this model features a heavier-duty frame, improved height adjusters and a reinforced spring system. Therefore, businesses that regularly transport, assemble and use their gazebo throughout the year benefit from its increased strength and durability.

Alternatively, if you require a bespoke gazebo with custom wall layouts, doors or window panels, please view our Custom Printed Pop-Up Gazebo.

Request a Heavy Duty Gazebo Quote ↓

Why Choose a Heavy Duty Printed Gazebo?

Whether you exhibit indoors or outdoors, a Heavy Duty Printed Gazebo is designed for businesses that require a stronger commercial display for frequent use. The reinforced frame provides additional durability while remaining quick to assemble using the same tool-free pop-up system.

Moreover, the commercial-grade 50mm hexagonal aluminium frame features 1.8mm-thick aluminium extrusion, improved height adjusters and a reinforced spring system. As a result, it delivers increased strength for demanding event schedules and repeated commercial use.

We print every gazebo in full colour using dye-sublimation printing onto durable 600D polyester. In addition, you can add optional full-height printed walls and double-sided wall printing. As a result, you can create a professional branded space for exhibitions, sporting events, hospitality and outdoor promotions.

• Commercial-grade 50mm hexagonal aluminium frame.
• 1.8mm-thick aluminium extrusion.
• Improved height adjusters.
• Reinforced spring system.
• Available in 3m x 3m, 3m x 4.5m and 3m x 6m.
• Printed canopy with optional full-height walls.
• Optional double-sided wall printing.
• Full-colour dye-sublimation printing.
• Suitable for indoor and outdoor commercial use.

What’s Included?

We supply every Heavy Duty Printed Gazebo to your approved specification. Therefore, you receive a system configured to match your approved quotation.

Whether you require a printed canopy or a complete branded gazebo with optional printed walls, we prepare each system to match your quotation.

In addition, your quotation can include:

• 50mm heavy-duty hexagonal aluminium pop-up frame.
• Custom printed 600D polyester canopy.
• Optional full-height printed walls.
• Optional double-sided wall printing.
• Ground pegs and guide ropes.
• Heavy-duty wheeled carry bag.
• Optional gazebo leg weights.
• Optional printed feather flags.
• Optional printed tablecloths.
• Optional exhibition counters.

Important: The final contents depend on the canopy, wall and accessory options included within your approved quotation.

Heavy Duty Frame & Print Specification

In summary, our Heavy Duty Printed Gazebo combines a commercial-grade 50mm hexagonal aluminium frame with professional dye-sublimation printed graphics to create a durable display for regular indoor and outdoor use. Furthermore, every system is manufactured using high-quality components that provide improved strength while remaining quick to assemble without tools. Consequently, it is suitable for frequent commercial use.

However, every outdoor gazebo should always be secured using suitable anchoring equipment for the surface on which it is installed. Additionally, use appropriate ballast or fixing methods for the installation surface. Finally, for hard standing, we recommend using optional gazebo leg weights in addition to any other appropriate fixing methods.

For general guidance on safe temporary event structures, please refer to the Health and Safety Executive event safety guidance.

What makes this a heavy duty printed gazebo?

This heavy duty printed gazebo uses a commercial-grade 50mm hexagonal aluminium frame with 1.8mm-thick aluminium extrusion, improved height adjusters and a reinforced spring system — stronger than our standard 40mm gazebo range and built for regular, repeated commercial use.

Available Heavy Duty Gazebo Sizes

Our Heavy Duty Printed Gazebo is available in three commercial sizes to suit different event spaces and branding requirements. The range includes 3m x 3m (approximately 10ft x 10ft), 3m x 4.5m (approximately 10ft x 15ft) and 3m x 6m (approximately 10ft x 20ft) models. Whether you require a compact promotional shelter or a large branded event space, each size uses the same commercial-grade 50mm hexagonal aluminium frame and professional dye-sublimation printed graphics.

3m x 3m Heavy Duty Printed Gazebo

The 3m x 3m model provides an excellent balance between portability and branding space. Consequently, it is well suited to exhibitions, trade shows, sporting events, outdoor promotions, hospitality events and market stalls where space may be limited.

3m x 4.5m Heavy Duty Printed Gazebo

The 3m x 4.5m model provides additional covered space for larger product displays, visitor demonstrations, catering equipment or customer meeting areas. Furthermore, the wider canopy creates a larger printable area for company branding and promotional graphics.

3m x 6m Heavy Duty Printed Gazebo

The 3m x 6m Heavy Duty Printed Gazebo offers the largest covered area within the range. Therefore, it is suitable for larger exhibitions, sporting events, hospitality areas, roadshows, corporate events and organisations that require maximum branding coverage.

Every size is available with a printed canopy, optional full-height printed walls and optional double-sided wall printing. In addition, we can supply matching accessories to create a complete branded event display.

Standard or Heavy Duty Gazebo?

Our standard printed gazebo kits use a 40mm aluminium frame and are suitable for exhibitions, markets, sporting events and regular promotional use.

However, the Heavy Duty Printed Gazebo is designed for customers who specifically require the stronger 50mm commercial frame, 1.8mm-thick aluminium extrusion, improved height adjusters and reinforced spring system.

If you do not require the Heavy Duty 50mm frame, please view our Pop-Up Gazebo Kits for standard printed gazebo configurations.

Artwork and Printing

We print each Heavy Duty Printed Gazebo using full-colour dye-sublimation printing onto durable 600D polyester. This process produces strong colour coverage across the canopy and any optional printed walls.

For the best results, supply print-ready PDF artwork using the correct template for each panel. Prepare separate artwork for the canopy, valance and any full-height walls included in your quotation.

Keep important logos, text and contact details clear of seams, hems, fixing areas and panel edges. In addition, use high-resolution images and vector logos where possible to maintain sharp printed detail at full size.

If your files are not print ready, we can review the supplied artwork before production. Once the artwork has been checked, we will provide a digital proof for approval before printing begins.

Optional Accessories

You can add accessories to improve stability, transport and presentation. For example, suitable gazebo leg weights are recommended when ground pegs cannot be used.

• Gazebo leg weights
• Additional full-height printed walls
• Double-sided wall printing
• Replacement canopy and wall graphics
• Printed feather flags
• Printed tablecloths
• Exhibition counters

In addition, matching printed products can help create a consistent branded event display around the gazebo.

Assembly and Transport

The heavy-duty aluminium frame uses a tool-free pop-up design. First, expand the frame and secure the locking points. Then fit the printed canopy while the frame remains at a manageable height.

After fitting the canopy, raise the telescopic legs to the required height. Add any printed walls and secure the gazebo using appropriate anchoring equipment for the installation surface.

For transport, the frame is supplied with a heavy-duty wheeled carry bag. Store the printed graphics clean and dry between events to help protect the fabric and printed finish.

Suitable Uses

A Heavy Duty Printed Gazebo is suitable for businesses and organisations that require a stronger commercial display for repeated event use.

• Trade shows and exhibitions
• Sporting events and race meetings
• Motorsport and vehicle displays
• Markets and food festivals
• Corporate hospitality
• Outdoor promotions and roadshows
• Schools, colleges and universities
• Charity and community events
• Local authority and public events
• Product launches and brand activations

Therefore, this product is particularly suitable for event teams that transport, assemble and reuse their gazebo regularly.

Safety Information

Always secure the gazebo using suitable anchoring equipment for the surface and weather conditions. Use the supplied ground pegs and guide ropes where the ground allows.

However, when installing the gazebo on hard standing, use suitable leg weights or another appropriate ballast system. The stated wind guidance of approximately 13–18mph applies only when the gazebo is correctly anchored and used in reasonable conditions.

Do not use the gazebo in adverse or unsuitable weather. For further information, refer to the Health and Safety Executive event safety guidance.

Request a Heavy Duty Gazebo Quote

To prepare an accurate quotation, please provide the following information:

• Required gazebo size
• Printed canopy requirement
• Number of full-height walls
• Single- or double-sided wall printing
• Required accessories
• Delivery postcode
• Required delivery date
• Artwork status

If you have any questions, please contact Jenwill Printers. We will help you select a Heavy Duty Printed Gazebo that matches your event requirements and prepare a quotation based on the approved specification.

The post Heavy Duty Printed Gazebo appeared first on Jenwill Printers.

First, choose between a Standard 40mm aluminium pop-up frame and a Heavy Duty 50mm aluminium pop-up frame. Then select an available frame size, printed canopy and compatible wall configuration.

In addition, you can request double-sided wall printing where compatible and include matching promotional products such as branded tables, printed tablecloths, exhibition counters and feather flags within the same quotation.

If you only require an open-sided standard gazebo with a printed canopy, please view our Pop-Up Gazebo Standard Kit. Alternatively, if you require a stronger commercial frame without configuring a bespoke gazebo, please view our Heavy Duty Printed Gazebo.

Request a Custom Gazebo Quote ↓

Configure Your Custom Printed Pop-Up Gazebo

Every event setup is different. Consequently, this configurable product is intended for customers who require a tailored combination of frame, canopy, printed walls and optional accessories.

Instead of choosing a fixed gazebo kit, select the frame platform and compatible components required for your setup.

First, choose either the Standard 40mm aluminium frame or Heavy Duty 50mm aluminium frame. Next, select the available frame size, printed canopy and compatible wall configuration.

Depending on the selected frame platform, your quotation can include full walls, half walls, doors, window panels or double-sided wall printing where compatible and available.

As a result, this flexible approach makes a custom printed pop-up gazebo ideal for businesses, organisations and event teams that require a tailored display rather than an off-the-shelf solution.

Furthermore, this bespoke approach allows you to create a gazebo that matches your branding, event layout and operational requirements without compromising on the features you need.

Why Choose a Custom Printed Pop-Up Gazebo?

• Choose between a Standard 40mm or Heavy Duty 50mm aluminium frame.
• Select an available frame size for your chosen platform.
• Select only the compatible walls and accessories you require.
• Add full walls, half walls, doors or window panels where compatible and available.
• Request double-sided wall printing where compatible.
• Include branded tables, printed tablecloths, printed flags and exhibition counters within the same quotation.
• Professionally printed using full-colour dye-sublimation printing.
• Suitable for indoor and outdoor promotional events.

Custom Printed Pop-Up Gazebo Configuration Options

Each custom printed pop-up gazebo is manufactured to your approved specification. Instead of supplying a fixed package, we prepare each quotation around your selected frame platform, available frame size, printed graphics and compatible accessories.

Depending on your requirements, your quotation can include the following:

• Standard 40mm Pro 40 aluminium pop-up frame
• Heavy Duty 50mm aluminium pop-up frame
• Available frame size to suit your selected frame platform
• Custom printed canopy
• Compatible full walls, half walls, doors or window panels where available
• Optional double-sided wall printing where compatible
• Ground pegs and guide ropes
• Wheeled carry bag
• Optional gazebo leg weights
• Optional printed tables, printed tablecloths, exhibition counters and feather flags

Each quotation is individually prepared around your requirements. Therefore, the final contents depend on your selected frame platform, selected graphics and approved quotation. Only the compatible components included within that quotation will be supplied.

Custom Printed Pop-Up Gazebo Specifications

Your custom printed pop-up gazebo can be configured around either our Standard 40mm aluminium frame or Heavy Duty 50mm aluminium frame. However, the available sizes, wall panels and compatible printing options depend on the selected frame platform.

Therefore, compare the two frame options below before requesting your quotation.

Available Custom Gazebo Frame Sizes

First, choose the frame platform that best suits your intended use. The available sizes differ between the Standard and Heavy Duty systems. Therefore, confirm your preferred frame before selecting the canopy and wall configuration.

Standard 40mm Gazebo Sizes

• 2m x 2m (Approx. 6.5ft x 6.5ft) – For example, choose this compact size for sampling events, information points and smaller promotional spaces.
• 3m x 3m (Approx. 10ft x 10ft) – Alternatively, this versatile size suits exhibitions, trade shows, sporting events and outdoor promotions.
• 3m x 4.5m (Approx. 10ft x 15ft) – In addition, this wider format provides more space for demonstrations, hospitality areas and larger displays.
• 3m x 6m (Approx. 10ft x 20ft) – Finally, the largest Standard format suits vehicle displays, hospitality areas and high-footfall promotions.

Heavy Duty 50mm Gazebo Sizes

• 3m x 3m (Approx. 10ft x 10ft)
• 3m x 4.5m (Approx. 10ft x 15ft)
• 3m x 6m (Approx. 10ft x 20ft)

Therefore, after selecting your preferred frame platform and size, we can prepare your quotation around the compatible canopy, wall configuration and optional products required.

Custom Printed Pop-Up Gazebo Artwork Requirements

First, supply print-ready PDF artwork wherever possible. However, if your artwork is not print ready, we can check the files supplied before production.

In addition, prepare separate artwork for the canopy, walls and any other printed display products included within your quotation. Keep important logos, text and graphics clear of seams, hems and fixing points.

Finally, we will provide a digital proof for approval before printing begins.

Optional Products for Your Custom Gazebo Setup

In addition, compatible products can be included within your custom gazebo quotation to create a coordinated branded event setup. However, these products are optional and will only be supplied when included within your approved quotation.

• 8.5kg gazebo leg weights
• Printed feather flags
• Printed tablecloths
• Promotional tables
• Exhibition counters
• Compatible additional printed wall panels
• Replacement canopy and wall graphics

Suitable Uses

A Custom Printed Pop-Up Gazebo can be configured for a wide range of indoor and outdoor applications. For example, suitable uses include:

• Trade shows and exhibitions
• Sporting events
• Outdoor promotions
• Food festivals and markets
• Corporate hospitality
• Schools, colleges and universities
• Charity fundraising events
• Community events
• Product launches
• Brand activations

Custom Printed Pop-Up Gazebo Safety Information

For safety, always secure your gazebo using the supplied ground pegs and guide ropes where ground conditions allow. However, when pegs cannot be used, suitable gazebo leg weights or another appropriate anchoring system should be used.

Please note: As general guidance, the gazebo should only be used in winds of approximately 13–18mph or below when correctly secured. In addition, it should not be used during adverse or unsuitable weather conditions.

Finally, refer to the Health and Safety Executive event safety guidance for general information about temporary event structures.

Can I build my own custom printed gazebo?

Yes — choose your frame platform, size, canopy and wall configuration to build your own custom printed gazebo around your exact event requirements. Every gazebo is printed in full colour using dye-sublimation printing.

Request a Custom Gazebo Quote

Because every custom printed pop-up gazebo is prepared to an individual specification, pricing is provided on a quotation basis.

To help us prepare an accurate quotation, please provide:

• Standard 40mm or Heavy Duty 50mm frame preference
• Required frame size
• Canopy requirements
• Required wall configuration
• Any doors or window panels required
• Single or double-sided wall printing where required
• Optional products
• Delivery postcode
• Required delivery date

Alternatively, if you are unsure which frame or configuration is suitable, please contact our team. We can help you identify the appropriate frame platform, compatible graphics and optional products before preparing your quotation.

The post Custom Printed Pop-Up Gazebo appeared first on Jenwill Printers.

Available in 2m x 2m, 3m x 3m, 3m x 4.5m and 3m x 6m sizes, every canopy and half wall is printed in full colour using dye-sublimation printing onto durable 600D polyester. Consequently, your branding remains vibrant and professional for repeated indoor and outdoor use.

Unlike the Standard Plus Kit, this product includes three printed half walls to create a U-shaped display with branding around three sides while leaving the entrance fully open for customers and visitors.

However, if you require full-height wall panels for greater shelter or privacy, please view our Custom Printed Pop-Up Gazebo. Similarly, if you require a stronger commercial frame for intensive use, please see our Heavy Duty Printed Gazebo.

Request an Imperial Kit Quote ↓

Why Choose a Printed Gazebo with Three Half Walls?

The Pop-Up Gazebo Imperial Kit is designed for businesses and organisations that require a professional branded gazebo with clearly defined customer boundaries while maintaining an open and welcoming display. Whether you are serving customers, demonstrating products or managing registrations, the three half walls create a practical working area without restricting visibility.

Furthermore, the commercial-quality Pro 40 aluminium frame combines strength, portability and quick assembly, while the printed canopy and three half walls maximise branding from every direction around the stand.

• Printed canopy with three matching half walls.
• 40mm Pro 40 hexagonal aluminium frame.
• Four adjustable height settings.
• Single-sided full-colour dye-sublimation printing.
• Durable 600D polyester graphics.
• Available in four popular sizes.
• Open-front U-shaped display layout.
• Professional customer-facing appearance.
• Quick tool-free assembly.
• Suitable for indoor and outdoor promotional events.

What’s Included with the Pop-Up Gazebo Imperial Kit?

Every Pop-Up Gazebo Imperial Kit is supplied as a complete package with a printed canopy and three matching half walls. Therefore, everything required for the standard setup is included.

• 40mm Pro 40 hexagonal aluminium pop-up frame.
• Single-sided custom printed 600D polyester canopy.
• Three custom printed half walls with support rails.
• Ground pegs and guide ropes.
• Wheeled carry bag for the gazebo frame.

Important: Full-height wall panels, doors and window panels are not included with this product. However, they are available through our Custom Printed Pop-Up Gazebo range.

Printed Gazebo with Three Half Walls Specifications

In summary, the Pop-Up Gazebo Imperial Kit combines a professional Pro 40 aluminium frame with a custom printed canopy and three matching half walls. This U-shaped configuration provides branding around three sides while leaving the front fully open for customer access.

Printed Gazebo with Three Half Walls Sizes

Firstly, the Pop-Up Gazebo Imperial Kit is available in four sizes to suit different event spaces, exhibition stands and promotional requirements.

2m x 2m Imperial Kit

The 2m x 2m model is approximately 6.5ft x 6.5ft. Consequently, it is suitable for compact promotional areas, information points, sampling events and smaller market pitches where a defined customer-facing space is required.

3m x 3m Imperial Kit

The 3m x 3m model is approximately 10ft x 10ft. Therefore, it provides a versatile footprint for exhibitions, trade shows, sporting events, retail promotions and outdoor marketing campaigns.

3m x 4.5m Imperial Kit

The 3m x 4.5m model is approximately 10ft x 15ft. Furthermore, it provides additional covered space for demonstrations, hospitality, customer service and branded product displays.

3m x 6m Imperial Kit

The 3m x 6m model is approximately 10ft x 20ft. As a result, it is ideal for larger outdoor events, roadshows, sporting venues, hospitality areas and high-footfall promotional environments.

Suitable Uses for a Printed Gazebo with Three Half Walls

Furthermore, the combination of a printed canopy and three half walls creates a professional U-shaped display that remains fully open at the front while providing branding and separation on the remaining three sides. Consequently, it is ideal where businesses need a practical working area without restricting customer access.

• Trade shows and exhibitions
• Markets and food festivals
• Outdoor promotional campaigns
• Corporate hospitality events
• Sporting events
• Product launches
• Sampling campaigns
• Customer service counters
• Information and registration points
• Schools, colleges and universities
• Charity and community events

Printed Gazebo Artwork Requirements

Firstly, supply print-ready PDF artwork using the correct canopy and half wall templates wherever possible. Keep logos, contact details and important graphics clear of hems, seams and fixing points to achieve the best printed result.

In addition, use high-resolution images and vector logos whenever available. If your artwork is not print ready, we can check your supplied files before production and provide a digital proof for approval.

The Imperial Kit includes artwork for the canopy and three half walls. However, additional full-height wall panels, printed tablecloths, exhibition counters and feather flags can be quoted separately if required.

Assembly, Transport and Storage

To begin with, expand the Pro 40 aluminium frame before fitting the printed canopy. Next, install the three half wall support rails before attaching each printed half wall.

Afterwards, raise the adjustable legs to the required height, secure the locking points and anchor the gazebo using the supplied guide ropes and ground pegs where ground conditions allow.

Finally, the supplied wheeled carry bag makes transport between events straightforward. Store the canopy and half walls clean and dry after use to help protect the printed graphics and prolong their lifespan.

Safety Information

Firstly, always secure the gazebo using the supplied ground pegs and guide ropes whenever ground conditions permit.

However, where ground pegs cannot be used, suitable gazebo leg weights or another appropriate ballast system should always be used. The stated wind guidance of approximately 13–18mph applies only when the gazebo has been correctly anchored and used in suitable weather conditions.

Finally, do not use the gazebo during adverse weather conditions. For further guidance, please refer to the Health and Safety Executive event safety guidance.

Request a Printed Gazebo with Three Half Walls Quote

Finally, to prepare an accurate quotation, please provide:

• Required gazebo size
• Quantity
• Delivery postcode
• Required delivery date
• Artwork status
• Any additional requirements

If you require a branded gazebo with a professional printed canopy and three matching half walls, the Pop-Up Gazebo Imperial Kit provides an excellent balance between accessibility, branding and practicality. Therefore, please contact Jenwill Printers for a quotation based on your approved specification.

The post Printed Gazebo with Three Half Walls appeared first on Jenwill Printers.

The Daylight Kit combines a full-height back wall with two printed half walls. This layout frames the stand, increases the graphic area and leaves the front open for visitors, making it suitable for exhibitions, hospitality, markets and outdoor campaigns.

Why choose this gazebo kit?

• Back wall creates a strong branded focal point
• Two half walls define the side boundaries without blocking views
• Open entrance supports customer flow
• Balanced configuration for presentation and accessibility

What is included?

• One 40mm hexagonal aluminium pop-up frame
• One single-sided custom printed 600D polyester canopy
• One single-sided full-height printed back wall in 600D polyester
• Two single-sided printed half walls in 600D polyester
• Two half-wall support bars
• Ground pegs and guide ropes
• One wheeled carry bag for the gazebo frame

Gazebo frame and print specification

• Available sizes: 2m × 2m, 3m × 3m, 3m × 4.5m and 3m × 6m
• Frame: 40mm hexagonal aluminium pop-up structure with four adjustable height settings
• Canopy: Single-sided full-colour print on 600D polyester
• Print method: Dye-sublimation fabric printing
• Wall printing: Included wall panels are supplied with single-sided print; double-sided wall printing is available as an option.
• Performance: Weather-resistant graphics with a B1 fire rating
• Wind rating: 13–18mph when the gazebo is correctly anchored
• Assembly: Tool-free pop-up frame
• Included with the frame: Ground pegs, guide ropes and a wheeled carry bag
• Use: Indoor and outdoor events, promotions, markets and hospitality displays

Safety note: Secure the gazebo for the surface and conditions. Use suitable leg weights where ground pegs cannot be fitted, and do not use the structure in unsuitable weather.

Artwork requirements

Prepare separate artwork for the canopy, walls, tablecloth, counter or flags included with the selected kit. Keep logos and important text clear of seams, fixing areas and panel edges. Print-ready PDF artwork is preferred, although available files can be checked before production.

Request a quotation: Send the required frame size, delivery postcode, required date and artwork details. Call 07930 963900 or email print@jenwillprinters.co.uk.

The post Pop-Up Gazebo – Daylight Kit (Back Wall + 2 Half Walls) appeared first on Jenwill Printers.

The Daylight Plus Kit adds a portable printed counter to the Daylight wall configuration. It creates a structured event stand with a clear reception, demonstration or sales point positioned inside the branded gazebo.

Why choose this gazebo kit?

• Three wall panels frame the display
• Portable counter creates a dedicated customer-contact point
• Coordinated graphics can be applied across the canopy, walls and counter
• Suitable for registrations, sampling, information and product promotion

What is included?

• One 40mm hexagonal aluminium pop-up frame
• One single-sided custom printed 600D polyester canopy
• One single-sided full-height printed back wall in 600D polyester
• Two single-sided printed half walls in 600D polyester
• Two half-wall support bars
• One printed fabric pop-up counter with a 210gsm stretch-polyester graphic
• Ground pegs and guide ropes
• One wheeled carry bag for the gazebo frame

Gazebo frame and print specification

• Available sizes: 2m × 2m, 3m × 3m, 3m × 4.5m and 3m × 6m
• Frame: 40mm hexagonal aluminium pop-up structure with four adjustable height settings
• Canopy: Single-sided full-colour print on 600D polyester
• Print method: Dye-sublimation fabric printing
• Wall printing: Included wall panels are supplied with single-sided print; double-sided wall printing is available as an option.
• Performance: Weather-resistant graphics with a B1 fire rating
• Wind rating: 13–18mph when the gazebo is correctly anchored
• Assembly: Tool-free pop-up frame
• Included with the frame: Ground pegs, guide ropes and a wheeled carry bag
• Use: Indoor and outdoor events, promotions, markets and hospitality displays

Safety note: Secure the gazebo for the surface and conditions. Use suitable leg weights where ground pegs cannot be fitted, and do not use the structure in unsuitable weather.

Artwork requirements

Prepare separate artwork for the canopy, walls, tablecloth, counter or flags included with the selected kit. Keep logos and important text clear of seams, fixing areas and panel edges. Print-ready PDF artwork is preferred, although available files can be checked before production.

Request a quotation: Send the required frame size, delivery postcode, required date and artwork details. Call 07930 963900 or email print@jenwillprinters.co.uk.

The post Pop-Up Gazebo – Daylight Plus Kit (Walls + Counter) appeared first on Jenwill Printers.

The Vision Kit combines the Daylight wall arrangement with a folding trestle table and printed tablecloth. The result is a defined, accessible gazebo stand with a practical display surface and branding across several viewing levels.

Why choose this gazebo kit?

• Full rear wall and half-height side panels frame the stand
• Included table supports product display, registration and serving
• Printed tablecloth adds front-facing branding
• Open entrance creates a welcoming visitor route

What is included?

• One 40mm hexagonal aluminium pop-up frame
• One single-sided custom printed 600D polyester canopy
• One single-sided full-height printed back wall in 600D polyester
• Two single-sided printed half walls in 600D polyester
• Two half-wall support bars
• One folding trestle table measuring 750mm high × 1830mm wide × 750mm deep
• One printed tablecloth measuring 1780mm × 2780mm in 210gsm recycled polyester
• Ground pegs and guide ropes
• One wheeled carry bag for the gazebo frame

Gazebo frame and print specification

• Available sizes: 2m × 2m, 3m × 3m, 3m × 4.5m and 3m × 6m
• Frame: 40mm hexagonal aluminium pop-up structure with four adjustable height settings
• Canopy: Single-sided full-colour print on 600D polyester
• Print method: Dye-sublimation fabric printing
• Wall printing: Included wall panels are supplied with single-sided print; double-sided wall printing is available as an option.
• Performance: Weather-resistant graphics with a B1 fire rating
• Wind rating: 13–18mph when the gazebo is correctly anchored
• Assembly: Tool-free pop-up frame
• Included with the frame: Ground pegs, guide ropes and a wheeled carry bag
• Use: Indoor and outdoor events, promotions, markets and hospitality displays

Safety note: Secure the gazebo for the surface and conditions. Use suitable leg weights where ground pegs cannot be fitted, and do not use the structure in unsuitable weather.

Artwork requirements

Prepare separate artwork for the canopy, walls, tablecloth, counter or flags included with the selected kit. Keep logos and important text clear of seams, fixing areas and panel edges. Print-ready PDF artwork is preferred, although available files can be checked before production.

Request a quotation: Send the required frame size, delivery postcode, required date and artwork details. Call 07930 963900 or email print@jenwillprinters.co.uk.

The post Pop-Up Gazebo – Vision Kit (Walls + Table & Cloth) appeared first on Jenwill Printers.

The Vision Plus Kit extends the Vision layout with two compact teardrop flags mounted to the gazebo frame. It provides branding above the canopy, across the walls, on the tablecloth and at both sides of the stand.

Why choose this gazebo kit?

• Two 2.1m flags increase visibility around the gazebo
• Flag brackets attach the flags directly to the structure
• Table and tablecloth create a practical customer-facing display
• Wall arrangement defines the stand while keeping the entrance open

What is included?

• One 40mm hexagonal aluminium pop-up frame
• One single-sided custom printed 600D polyester canopy
• One single-sided full-height printed back wall in 600D polyester
• Two single-sided printed half walls in 600D polyester
• Two half-wall support bars
• Two 2.1m single-sided fibreglass teardrop flags with 115gsm knitted-polyester graphics
• Two flag-fixing brackets
• One folding trestle table measuring 750mm high × 1830mm wide × 750mm deep
• One printed tablecloth measuring 1780mm × 2780mm in 210gsm recycled polyester
• Ground pegs and guide ropes
• One wheeled carry bag for the gazebo frame

Gazebo frame and print specification

• Available sizes: 2m × 2m, 3m × 3m, 3m × 4.5m and 3m × 6m
• Frame: 40mm hexagonal aluminium pop-up structure with four adjustable height settings
• Canopy: Single-sided full-colour print on 600D polyester
• Print method: Dye-sublimation fabric printing
• Wall printing: Included wall panels are supplied with single-sided print; double-sided wall printing is available as an option.
• Performance: Weather-resistant graphics with a B1 fire rating
• Wind rating: 13–18mph when the gazebo is correctly anchored
• Assembly: Tool-free pop-up frame
• Included with the frame: Ground pegs, guide ropes and a wheeled carry bag
• Use: Indoor and outdoor events, promotions, markets and hospitality displays

Safety note: Secure the gazebo for the surface and conditions. Use suitable leg weights where ground pegs cannot be fitted, and do not use the structure in unsuitable weather.

Artwork requirements

Prepare separate artwork for the canopy, walls, tablecloth, counter or flags included with the selected kit. Keep logos and important text clear of seams, fixing areas and panel edges. Print-ready PDF artwork is preferred, although available files can be checked before production.

Request a quotation: Send the required frame size, delivery postcode, required date and artwork details. Call 07930 963900 or email print@jenwillprinters.co.uk.

The post Pop-Up Gazebo – Vision Plus Kit (Table, Walls + Flags) appeared first on Jenwill Printers.

The Event Kit combines a framed gazebo display with two freestanding curve flags. A full back wall and two half walls form the stand, while the 3m flags and water bases extend branding beyond the gazebo footprint.

Why choose this gazebo kit?

• Two 3m curve flags increase long-distance visibility
• Small water bases allow the flags to stand independently
• Back wall and half walls create a defined promotional area
• Suitable for sports events, festivals, outdoor campaigns and branded activations

What is included?

• One 40mm hexagonal aluminium pop-up frame
• One single-sided custom printed 600D polyester canopy
• One single-sided full-height printed wall in 600D polyester
• Two single-sided printed half walls in 600D polyester
• Two half-wall support bars
• Two 3m single-sided curve flags with 115gsm knitted-polyester graphics
• Two small water bases for the flags
• Ground pegs and guide ropes
• One wheeled carry bag for the gazebo frame

Gazebo frame and print specification

• Available sizes: 2m × 2m, 3m × 3m, 3m × 4.5m and 3m × 6m
• Frame: 40mm hexagonal aluminium pop-up structure with four adjustable height settings
• Canopy: Single-sided full-colour print on 600D polyester
• Print method: Dye-sublimation fabric printing
• Wall printing: Included wall panels are supplied with single-sided print; double-sided wall printing is available as an option.
• Performance: Weather-resistant graphics with a B1 fire rating
• Wind rating: 13–18mph when the gazebo is correctly anchored
• Assembly: Tool-free pop-up frame
• Included with the frame: Ground pegs, guide ropes and a wheeled carry bag
• Use: Indoor and outdoor events, promotions, markets and hospitality displays

Safety note: Secure the gazebo for the surface and conditions. Use suitable leg weights where ground pegs cannot be fitted, and do not use the structure in unsuitable weather.

Artwork requirements

Prepare separate artwork for the canopy, walls, tablecloth, counter or flags included with the selected kit. Keep logos and important text clear of seams, fixing areas and panel edges. Print-ready PDF artwork is preferred, although available files can be checked before production.

Request a quotation: Send the required frame size, delivery postcode, required date and artwork details. Call 07930 963900 or email print@jenwillprinters.co.uk.

The post Pop-Up Gazebo – Event Kit (Walls + 2 Curve Flags) appeared first on Jenwill Printers.

The Event Pro Kit adds a portable fabric counter to the Event configuration. It provides a complete customer-facing setup with a defined gazebo interior, two freestanding flags and a dedicated point for enquiries, demonstrations or transactions.

Why choose this gazebo kit?

• Counter creates a clear reception or promotional point
• Two 3m curve flags extend visibility beyond the stand
• Water bases are included for the flag displays
• Canopy, walls, flags and counter can carry coordinated artwork

What is included?

• One 40mm hexagonal aluminium pop-up frame
• One single-sided custom printed 600D polyester canopy
• One single-sided full-height printed wall in 600D polyester
• Two single-sided printed half walls in 600D polyester
• Two half-wall support bars
• Two 3m single-sided curve flags with 115gsm knitted-polyester graphics
• Two small water bases for the flags
• One printed fabric pop-up counter with a 210gsm stretch-polyester graphic
• Ground pegs and guide ropes
• One wheeled carry bag for the gazebo frame

Gazebo frame and print specification

• Available sizes: 2m × 2m, 3m × 3m, 3m × 4.5m and 3m × 6m
• Frame: 40mm hexagonal aluminium pop-up structure with four adjustable height settings
• Canopy: Single-sided full-colour print on 600D polyester
• Print method: Dye-sublimation fabric printing
• Wall printing: Included wall panels are supplied with single-sided print; double-sided wall printing is available as an option.
• Performance: Weather-resistant graphics with a B1 fire rating
• Wind rating: 13–18mph when the gazebo is correctly anchored
• Assembly: Tool-free pop-up frame
• Included with the frame: Ground pegs, guide ropes and a wheeled carry bag
• Use: Indoor and outdoor events, promotions, markets and hospitality displays

Safety note: Secure the gazebo for the surface and conditions. Use suitable leg weights where ground pegs cannot be fitted, and do not use the structure in unsuitable weather.

Artwork requirements

Prepare separate artwork for the canopy, walls, tablecloth, counter or flags included with the selected kit. Keep logos and important text clear of seams, fixing areas and panel edges. Print-ready PDF artwork is preferred, although available files can be checked before production.

Request a quotation: Send the required frame size, delivery postcode, required date and artwork details. Call 07930 963900 or email print@jenwillprinters.co.uk.

The post Pop-Up Gazebo – Event Pro Kit (Walls, Flags + Counter) appeared first on Jenwill Printers.

Available in 2m x 2m, 3m x 3m, 3m x 4.5m and 3m x 6m sizes, every canopy and wall panel is printed in full colour using dye-sublimation printing onto durable 600D polyester. Consequently, your branding remains vibrant and professional for repeated indoor and outdoor use.

Unlike the Imperial Kit, this product includes three full-height printed walls to create a fully enclosed display on three sides, providing greater shelter, improved privacy and additional branded surface area while maintaining an open entrance at the front.

However, if you require a bespoke combination of walls, doors or window panels, please view our Custom Printed Pop-Up Gazebo. Similarly, if you require a stronger commercial frame for intensive use, please see our Heavy Duty Printed Gazebo.

Request a Complete Kit Quote ↓

Why Choose a Printed Gazebo with Three Full Walls?

The Pop-Up Gazebo Complete Kit is designed for businesses and organisations that require a fully enclosed branded display with maximum weather protection and privacy. Whether you are exhibiting products, serving customers, storing equipment or creating a secure working area, the three full-height walls provide a professional environment while keeping the front entrance open and welcoming.

Furthermore, the commercial-quality Pro 40 aluminium frame combines strength, portability and quick assembly, while the printed canopy and three full walls maximise your visible branding from every direction around the gazebo.

• Printed canopy with three matching full-height walls.
• 40mm Pro 40 hexagonal aluminium frame.
• Four adjustable height settings.
• Single-sided full-colour dye-sublimation printing.
• Durable 600D polyester graphics.
• Available in four popular sizes.
• Maximum branding and weather protection.
• Greater privacy and concealed storage area.
• Quick tool-free assembly.
• Suitable for indoor and outdoor promotional events.

What’s Included with the Pop-Up Gazebo Complete Kit?

Every Pop-Up Gazebo Complete Kit is supplied as a complete package with a printed canopy and three matching full-height wall panels. Therefore, everything required for the standard setup is included.

• 40mm Pro 40 hexagonal aluminium pop-up frame.
• Single-sided custom printed 600D polyester canopy.
• Three custom printed full-height wall panels.
• Wall support bars and fixings.
• Ground pegs and guide ropes.
• Wheeled carry bag for the gazebo frame.

Important: Doors, window panels and alternative wall configurations are not included with this product. However, they are available through our Custom Printed Pop-Up Gazebo range.

Printed Gazebo with Three Full Walls Specifications

In summary, the Pop-Up Gazebo Complete Kit combines a professional Pro 40 aluminium frame with a custom printed canopy and three full-height printed wall panels. This configuration provides maximum branding, increased weather protection and greater privacy while maintaining an open front entrance for customers and visitors.

Printed Gazebo with Three Full Walls Sizes

Firstly, the Pop-Up Gazebo Complete Kit is available in four sizes to suit different event spaces, exhibition stands and promotional requirements.

2m x 2m Complete Kit

The 2m x 2m model is approximately 6.5ft x 6.5ft. Consequently, it is suitable for compact exhibition spaces, information points, promotional events and smaller market pitches where greater weather protection and privacy are required.

3m x 3m Complete Kit

The 3m x 3m model is approximately 10ft x 10ft. Therefore, it provides a versatile footprint for exhibitions, trade shows, sporting events, retail promotions and outdoor marketing campaigns.

3m x 4.5m Complete Kit

The 3m x 4.5m model is approximately 10ft x 15ft. Furthermore, it provides additional covered space for demonstrations, hospitality areas, customer service and secure product displays.

3m x 6m Complete Kit

The 3m x 6m model is approximately 10ft x 20ft. As a result, it is ideal for larger outdoor events, roadshows, sporting venues, hospitality areas and high-footfall promotional environments where maximum enclosed branding is required.

Suitable Uses for a Printed Gazebo with Three Full Walls

Furthermore, the combination of a printed canopy and three full-height wall panels creates a professional enclosed display that offers increased weather protection, improved privacy and extensive branding on three sides. Consequently, it is ideal where businesses require a more secure working environment while keeping the front entrance open for customers and visitors.

• Trade shows and exhibitions
• Markets and food festivals
• Outdoor promotional campaigns
• Corporate hospitality events
• Sporting events
• Product launches
• Retail and merchandise sales
• Customer service areas
• Registration and information points
• Schools, colleges and universities
• Charity and community events

Printed Gazebo Artwork Requirements

Firstly, supply print-ready PDF artwork using the correct canopy and wall panel templates wherever possible. Keep logos, contact details and important graphics clear of hems, seams and fixing points to achieve the best printed result.

In addition, use high-resolution images and vector logos whenever available. If your artwork is not print ready, we can check your supplied files before production and provide a digital proof for approval.

The Complete Kit includes artwork for the canopy and three full-height wall panels. However, doors, window panels, printed tablecloths, exhibition counters and feather flags can be quoted separately if required.

Assembly, Transport and Storage

To begin with, expand the Pro 40 aluminium frame before fitting the printed canopy. Next, install the wall support bars before attaching each of the three full-height wall panels.

Afterwards, raise the adjustable legs to the required height, secure the locking points and anchor the gazebo using the supplied guide ropes and ground pegs where ground conditions allow.

Finally, the supplied wheeled carry bag makes transport between events straightforward. Store the canopy and wall panels clean and dry after use to help protect the printed graphics and prolong their lifespan.

Safety Information

Firstly, always secure the gazebo using the supplied ground pegs and guide ropes whenever ground conditions permit.

However, where ground pegs cannot be used, suitable gazebo leg weights or another appropriate ballast system should always be used. The stated wind guidance of approximately 13–18mph applies only when the gazebo has been correctly anchored and used in suitable weather conditions.

Finally, do not use the gazebo during adverse weather conditions. For further guidance, please refer to the Health and Safety Executive event safety guidance.

Request a Printed Gazebo with Three Full Walls Quote

Finally, to prepare an accurate quotation, please provide:

• Required gazebo size
• Quantity
• Delivery postcode
• Required delivery date
• Artwork status
• Any additional requirements

If you require a branded gazebo with a professional printed canopy and three full-height wall panels, the Pop-Up Gazebo Complete Kit provides maximum branding, increased weather protection and enhanced privacy while maintaining an open customer entrance. Therefore, please contact Jenwill Printers for a quotation based on your approved specification.

The post Printed Gazebo with Three Full Walls appeared first on Jenwill Printers.